吸料機電眼料斗的詳細介紹
自動吸料機及中央供料系統都有配套電眼料斗， 不銹鋼料斗:不銹鋼制造,規格齊全的不銹鋼料斗,,容量從2.5L,3L,7.5L,10L容量料斗,電眼料斗,光學級料斗,透明可視料斗經構合理完美,整體與原料接觸的部件采用不銹鋼,保證原料不受污染,堅固耐用。是塑料制品制造業原料輸送理想加工設備。
◎ 主機與料斗分體設計，安全、簡便。
◎ **立濾清裝置，方便清除積塵。
◎ 不銹鋼料斗。
◎ 微電腦操作控制程序。
◎ 過載、缺料報警。
◎ 700G采用高速整流馬達，體積小、吸力強，適合用于新料輸送。
◎ 800G、800G2采用感應式高壓風機，噪音小、壽命長。
◎ 800G、800G2具有逆轉自動清除粉塵功能。
◎ Host machine separated from the hopper,easy and safe to operate.
◎ Independent filter for easy cleaning.
◎ Stainless hopper.
◎ Microcomputer controlled.
◎ Alarm for overload and lack of material.
◎ High-speed rectificative motor of small footprint and strongsuction force for new material for AL-700G.
◎ Induction high-pressure pump of low noise and long service time for AL-800G/G2.
◎ Reverse cleaning for AL-800G/G2.
◎ 參數中的輸送能力及吸料揚程是以SBS原料為測試材料得出的數據，實際參數根據塑料比重、形狀及輸送長度、高度、管路特性、參數設定等因素而改變。
◎ 吸料機在輸送熱料時，料管需選配耐160度高溫料管。
◎ The parameters of the conveying capacity and suction lift are educed from tests on ABS.The actual parameters may be different due to the differences of the specific gravity and the shape of the material,the conveying distance and height,the specialty of pipeline and the seting of parameters.
◎ Heat-resistant(160℃)pipes should be used when conveying hot material
|
型號Model |
AL-700G |
AL-800G |
AL-800G2 |
|
|
馬達Motor |
型式Type |
碳刷式Carbon brush |
感應式Induction |
感應式Induction |
|
規格Specification |
1KW/1.3HP1Ф |
1.1KW/1.5HP3Ф |
2.2KW/3PH3Ф |
|
|
輸送能力（kg/h）Conveying capacity |
350-400 |
450-500 |
550-600 |
|
|
吸料揚程（m）Loading distance |
4 |
4 |
6 |
|
|
靜風壓（mm/H2O） Static wind pressure |
1550 |
1880 |
2400 |
|
|
儲料筒容量（L）Reservoir volume |
7.5 |
7.5 |
12 |
|
|
送料管內徑（mm）Convering tube inner dim |
Ф38 |
Ф38 |
Ф38 |
|
|
配送料管 Specification of the attached hoses |
Ф38mm×4m2pcs |
Ф38mm×4m2pcs |
Ф38mm×5m2pcs |
|
|
外形尺寸（cm）Dimensions |
主機Main frame |
37×30×56 |
42×38×64 |
50×40×72 |
|
儲料桶 Hopper |
28×34×43 |
45×32×45 |
45×32×45 |
|
|
凈重（kg） Net weight |
主機Main frame |
14 |
47 |
66 |
|
儲料桶 Hopper |
6 |
7 |
7 |
|